Visit The Dirt Forum for More Information

Author Topic:   Power steering set up help
Whitelightning
Dirt Freak

Total posts: 429
posted February 11, 2005 11:08 AM  
I have the pump, resivor, hose kit and fittings, It has no instruction at all anyione know how it all hooks up. What goes where , Thanks

powerglides
Dirt Freak

Total posts: 374
posted February 11, 2005 12:16 PM  
This is something where I would probably find the smartest racer you know. Buy him a case of Rolling Rock to come over and show ya how to hook everthing up and mount stuff. Installing the fittings on the hose correctly is important.

dirty58
Dirt Maniac

Total posts: 115
posted February 11, 2005 12:51 PM  
you will probally get more response with bud light

racin78p
Dirt Freak

Total posts: 333
posted February 12, 2005 12:55 AM  
ditto to the guys here, and make sure you get the pulleys all lined up. We had quite the time last year. Ended up getting water pump pulley spacers as well as crank pulley spacers. It's perfect now. Did the kit come with a pump bracket? Any name (s) on the parts? If so you can give those companies a call, too.

------------------
racin78p
if it ain't fun, then don't run

neil rucker
Dirt Forum Champ
Total posts: 799
posted February 12, 2005 06:21 PM  
run a hose from the -6 (small) fitting on the pump to the hi pressure side of the steering box. then run a -6 line from the return side of the steering box to the -6 (small) fitting on the side (near the top of the resevoir. (tank) finaly run a -10 line from the bottom of the resivoir (tank) to the -10 (large) fitting on the pump. The most tricky part is asembling the hoses. Its not hard, but MUST be done right. Call any speed shop or dealer that sells this stuff and they can walk you thru it. Hope this helps.

    

Back to the Archives