Visit The Dirt Forum for More Information

Author Topic:   tranny help
Dirt Roller

Total posts: 22
posted February 07, 2005 07:49 AM  
right now i hace a th350 and i am running a b&m shifter cable i wanna go to a rod setup so it will be more dependable and suggestion on how i sould set it up any help would be greatly appreciated

Dirt Maniac

Total posts: 148
posted February 07, 2005 01:08 PM  
I use a T-350
I got a 1/4" steel rod, weld a washer on the fwd. end attach to tranny with cotter key. Weld a bigger washer on the aft end, use a pin & clip to attach there, another pin & clip up higher on the pivot bracket as well. I got some Aluminum , 1/4" x 1-1/2" drilled a hole on the bottom end, then a pivot hole about 6" up. Put an "S" bend in the middle of it to clear my seat. Works great, weighs nothin'

Some People Race For A Living; I Live To Race

Dirt Freak

Total posts: 237
posted February 07, 2005 01:22 PM  
when we ran an auto with a rod,just put a 90 degree bend in one end ,welded on a washer,drilled a hole ,put a cotter key on to hold it on the tranny end.punched a hole in the floor,shoved it up thru,bent a 90 on the end for a handle and let it ride !worked great.

Dirt Roller

Total posts: 22
posted February 07, 2005 02:51 PM  
thanks guys any other suggestions or possibly pictures


Back to the Archives