Visit The Dirt Forum for More Information

Author Topic:   stock type brakes
bubba0six
Dirt Maniac

Total posts: 146
posted January 09, 2005 08:10 PM  
i run a 72 chevelle chassis and our rules say stock type brakes. then it also says stock type disc brakes ok. my chevelle came with drum brakes and we got two brackets that bolt where the backing plate is supposed to be and it lets you bolt a stock caliper to it and a stock rotor fits the spindle. so i now have stock type brakes, right? WRONG! i got thrown out. the tec guy said i have to get spindles off of a gm car that had disc brakes. my question is what do i get them off of that wont change my front geometry or will atleast help and not hurt? and also will i have to change my A frames also?

[This message has been edited by bubba0six (edited January 09, 2005).]

El Santo
Dirt Full Roller

Total posts: 36
posted January 09, 2005 10:02 PM  
Look for spindles off of a '67 to '69 camaro or a '67 to '74 nova body style with rear steer and flip the tie rod arm around for front steer and you got it made.

    

Back to the Archives