Visit The Dirt Forum for More Information

Author Topic:   tilton clutch assembly
Dirt Forum Racer

Total posts: 94
posted January 05, 2005 07:01 AM  
i got a used tilton triple disk clutch. it has no bolts to mount it to the flex plate and i cant find out anything about the bolts i will need does anyone know of a web sight that has this info. also what is the procedure to mount these. do you take the clutch appart mount the back then reasemble or do you bolt it up assembled i cant figure how you can do it if it is assembled. this is my first time with a triple disk.

Dirt Freak

Total posts: 265
posted January 05, 2005 12:14 PM  
you take it apart and sandwich the flywheel between the crank flange and the back plate.

Bolt wise did you try Tilton's website? I've got instructions to one at home and can look and see if they give any specifics about what bolts to use. I know the website use the same instructions too though. You do have to make sure the bolt heads have enough clearance inside the clutch.

Dirt Roller

Total posts: 19
posted January 05, 2005 01:50 PM  
we just use the short stock flywheel bolts and have had no problems

Dirt Forum Racer

Total posts: 94
posted January 06, 2005 04:45 AM  
thanks guys. i didn't know what there web site was i did a search and never found anything maybe i typed something wrong.


Back to the Archives