Visit The Dirt Forum for More Information

Author Topic:   Chassis Software
outlaw#03
Dirt Roller

Total posts: 25
posted November 26, 2004 06:58 PM  
Has anyone used Auto-Ware, or any other chassis software????

yenko
Dirt Full Roller

Total posts: 28
posted November 28, 2004 04:02 PM  
???

hoganhomer
Dirt Full Roller

Total posts: 53
posted December 04, 2004 04:29 PM  
I've got Computerized Chassis Weights. One of my professor's got it to work, so this Christmas break I'm gonna try with a couple of cars. The program can be used for dirt but I haven't tried dirt numbers yet, and I'm concerned about leaving zero values for sway bars and panhard bars. It is also really complex. It has 12 pages of measurements for suspension geometry alone and the values on the example are all mearsured to three digits past the decimal. I don't think that getting the measurements should be all that hard, I just hope that they don't have to be that precise. I'll know more about it after Christmas break. Hope you get it working.

outlaw#03
Dirt Roller

Total posts: 25
posted December 05, 2004 08:13 PM  
Thanks, hoganhomer. I haven't bought it yet was looking for some input from user's to see if it was worth buying. It sounds like you had trouble getting it to work???

hoganhomer
Dirt Full Roller

Total posts: 53
posted December 06, 2004 10:47 AM  
I haven't really tried it yet. I live four and a half hours from my car so most of the work I do on it is preparation and repair. I installed the program thinking that I would be able to input some vague numbers and see results, but there were just too many measurements to make rough estimations. This Christmas break I should have it working. It seems like it will be a very useful tool.

outlaw#03
Dirt Roller

Total posts: 25
posted December 08, 2004 07:53 AM  
Thanks, let me know how it works

    

Back to the Archives