Visit The Dirt Forum for More Information

Author Topic:   1/2 inch bolts in a arms
Racer98
Dirt Maniac

Total posts: 142
posted November 22, 2004 07:53 PM  
I would like to use 1/2 bolts in all the front and rear suspension. I did the upper arms on the front end, that was the easy part, what do you do for the rest, drill out the bushings? or my other option is to order metric hardened bolts, anyone no where I can buy them? thanks

Racer0
Dirt Maniac

Total posts: 149
posted November 22, 2004 08:37 PM  
Drill them out...

The Vanburen Rocket 22
Dirt Full Roller

Total posts: 30
posted November 22, 2004 09:00 PM  
drill them out or most neopreme bushings are already that size,we have done this in the past and had no problems, we ran on alot of ruff tracks.

The Vanburen Rocket 22
Dirt Full Roller

Total posts: 30
posted November 22, 2004 09:02 PM  
drill them out or most neopreme bushings are already that size,we have done this in the past and had no problems, we ran on alot of ruff tracks.

    

Back to the Archives