Visit The Dirt Forum for More Information

Author Topic:   Skirt
Whitelightning
Dirt Freak

Total posts: 429
posted November 22, 2004 01:36 AM  
Whats the best way to put a skirt around metric monte carlo. Is the plastic a good way to go or does it just break alot?

joetaylor
Dirt Forum Champ
Total posts: 640
posted November 22, 2004 05:59 AM  
yep that is what we do and no It don't break unless it is very cold I have used it for 2 years befor replacing it

------------------
if every thing is under control your not fast enough

rfb320
Dirt Maniac

Total posts: 150
posted November 22, 2004 09:37 AM  
I used the same aluminum that I used to tin in the car. I cut a piece the length of the car x 8 inches wide,then bent it 30 degrees right in the middle. Put the bend mark right at the bottem of the body so 4 inches will be on the body and the other 4 inches will be hanging down. Rivet on and it looks great. And it doesn't s****e when loading the car.

Whitelightning
Dirt Freak

Total posts: 429
posted November 22, 2004 05:54 PM  
Thanks do u have any pics of it that way sounds easy enuff.

rfb320
Dirt Maniac

Total posts: 150
posted November 23, 2004 12:21 PM  
Sorry I dont have a picture right now but I can sure try to get a couple to you with in the next day or two. P.m. me your email address.

Speedway65
Dirt Freak

Total posts: 344
posted November 23, 2004 01:02 PM  

 
Here is how we do ours with plastic.Even the lower rear quarters are plastic.

[This message has been edited by Speedway65 (edited November 23, 2004).]

    

Back to the Archives