Visit The Dirt Forum for More Information

Author Topic:   street stock
ready2race23
Dirt Full Roller

Total posts: 45
posted November 20, 2004 06:34 PM  
What is a good hyd cam? Would like a cam with tourqe. We run around 7000rpms. We have no lift rule, no vac, 355 chevy.

------------------
ETM

racer17j
Dirt Forum Champ
Total posts: 5390
posted November 20, 2004 09:44 PM  
750 edelbrock carb, stock intake, 461 heads 202/160 valves, headers, turbo 350 trans,

Steve Dupree
Dirt Freak

Total posts: 316
posted November 26, 2004 04:48 PM  
Hi there give this guy a call and tell him we sent you he knows his stuff and can make you a cam for your compression and intake.Midway performance warehouse717-339-5913 He will ground you what you want and ares only ran 140.00 Good luck and hope he helps you Steve Dupree

Raz_900
Dirt Forum Champ
Total posts: 635
posted November 28, 2004 12:07 AM  
With a stock intake you'd probably be faster turning less revs and cam'ing/gearing accordingly. I wouldn't run over 6000 with a stock intake.

beachracing
Dirt Forum Racer

Total posts: 94
posted November 28, 2004 12:12 AM  
isky 201292, with 1.6 rockers. tough cam with a light car, just don't advance it to much, maybe 2 degrees.

BigDaddy59sRacing
Dirt Newbie

Total posts: 2
posted December 02, 2004 09:01 PM  
Comp Cams Extreme Energy Series Hydraulic Cam. I used one on an enduro motor I ran a few years ago. Worked real well with stock vortec heads and Cast iron cheater intake available from Summit or GM Performance Parts. We didn't see 7000 though- worked best around 6400 then falls off.

    

Back to the Archives