Visit The Dirt Forum for More Information

Author Topic:   master cyl
Dirt Freak

Total posts: 344
posted November 15, 2004 12:22 PM  
If you had to run a stock master on a metric car but wanted to get rid of the booster.What master would you use?

Dirt Freak

Total posts: 466
posted November 15, 2004 01:54 PM  
69 Chevy P-U with Manual Brakes.

Dirt Forum Champ
Total posts: 784
posted November 15, 2004 05:26 PM  
Im with pickle but some of the earlier ones were cast and very heavy. which ones came lighter for 4 wh disc?

Light it up, Baby!

Dirt Maniac

Total posts: 120
posted November 16, 2004 10:22 AM  
We use the same MC that was on the car OK.

I have also use the one from the vette and it works great in my application with 4 wheel disc brakes.

I don't know why more tracks don't allow aftermarket MC's. It sure would help with some cautions if I could step on the brakes and actually bring the car to a stop.

Dirt Forum Champ
Total posts: 640
posted November 16, 2004 11:44 AM  
99 chevy 4wd 4 wheel disk 1" bore and alu with a big resivior this has worked for every one that has used it

if every thing is under control your not fast enough

mudd on the tires
Dirt Full Roller

Total posts: 42
posted November 16, 2004 04:54 PM  
i run a camaro. i got a m.c for a camaro without power brakes and done away with the boster and switched the lines so the rear line is on the front bigger bowl. i have disc on all 4.


Back to the Archives