Visit The Dirt Forum for More Information

Author Topic:   street stock clutch setup
jammin james
Dirt Maniac

Total posts: 118
posted November 12, 2004 06:59 PM  
going thru past posts everybody tell me if
i got this right

speedway 16lb flywheel part #6051510 $150
summit clutch part #zzzmu1675-1 $96
advanced auto starter part# p36645 $30

my only concern is if the clutch will mount to the flywheel
thanks

superdave
Dirt Freak

Total posts: 280
posted November 13, 2004 11:05 PM  
Be sure to check if the springs in the disk hub are going to clear the flywheel bolts. Try using the thin Moroso bolts if you have a problem. Most sprung hubs won't clear the bolts on the speedway and Ram flywheels.


Good luck,
Superdave

ss99
Dirt Maniac

Total posts: 120
posted November 15, 2004 11:44 AM  
Steve is correct. Stock type clutches won't clear the bolts on the Speedway or RAM billet flywheels. You'll have to use RAM clutch discs with no springs or the smaller springs. This is the exact reason why I switched back to the GM nodular flywheel with the LUK clutch.

cs

    

Back to the Archives