posted November 04, 2004 12:26 PM
from the information i have gathered i need to remount the a arms both top and bottom to create superior roll centers. i need to also move the mounts tward the front of the car 6 or so in. im also thinking of shortining the car to 106 how should this be done?
Eljojo Dirt Forum Champ
Total posts: 968
posted November 04, 2004 08:32 PM
Check the information you have been given...
bobaluuu Dirt Freak
Total posts: 474
posted November 04, 2004 09:07 PM
me thinks he be snatchin on our leg jes a little.
GARYAL Dirt Forum Racer
Total posts: 94
posted November 08, 2004 07:48 AM
IF YOU ARE GOING TO SHORTEN A METRIC CUT IT AT THE POINT THAT THE SIDES OF THE FRAME RAILS INTERSECT THE REAR FRAME SECTION IN FRONT OF THE REAR TIRES. CUT THAT WELD, SHORTEN THE SIDE FRAME RAILS, THEN SLIP IT BACK INTO PLACE AND REWELD. DO IT GOOD AND ITS HARD TO SPOT. ALSO DONT FOR GET TO GUM IT UP A LITTLE BEFORE YOU PAINT IT. NO NEED FOR THAT AREA TO LOOK TO NEET AND DRAW SOME ATTENTION.
mlpowley Dirt Full Roller
Total posts: 26
posted November 08, 2004 02:48 PM
thanks for your reply.