Visit The Dirt Forum for More Information

Author Topic:   Impala spindles
RACEINMUD
Dirt Freak

Total posts: 323
posted September 03, 2004 10:38 AM  
Hi, was curious what type of lower arms to run with Impala spindles. Got hit by a wall and had to replace one and just used a stock metric but that is not what was on there. Thanks, Race

mudd on the tires
Dirt Full Roller

Total posts: 42
posted September 05, 2004 01:49 PM  
i have a camaro, i replaced both spindles on mine on the pass. side i put spindle and lower a arm from 84 caprice, it has bigger outside bearing. on the driver side i used 78 impala spindle and it had the same small outer bearing that the camaro does. everything bolted up and i'm still running them now. the lower a arms are supposed to be the same for 70 through somewhere in the 80's on all gm full size cars.

[This message has been edited by mudd on the tires (edited September 05, 2004).]

    

Back to the Archives