Visit The Dirt Forum for More Information

Author Topic:   Looking for a Ford chassis builder
speed06
Dirt Full Roller

Total posts: 74
posted August 09, 2004 09:31 PM  
I am wanting to build a ford Super Street, anyone know who or where to look for a chassis builder?

pforsythe
Dirt Maniac

Total posts: 133
posted August 10, 2004 08:12 AM  
Try CRC fabrication in Russellville,Ar. I dont know the phone number but the guy builds some great cars.

speed06
Dirt Full Roller

Total posts: 74
posted August 11, 2004 07:20 AM  
Thank you, Ill give them a try..

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 1172
posted August 11, 2004 11:22 AM  
WHat kind of class is the ford car to be run in? Let me know and i will quote you a figure. I have built several modifieds for people off the forum and I have built a few ford chassis mods also. Richard
www.customperformance.org

speed06
Dirt Full Roller

Total posts: 74
posted August 11, 2004 11:31 AM  
Richard, It will be run in a Super Street class.
108" wheelbase tubular mod or latemodel chassis with a stock front clip with stock lower A arms and tubular uppers.
Leaf springs on the rear with a 9" floater rearend
Engine set back to be #1 plug to be even with upper ball joint.

[This message has been edited by speed06 (edited August 11, 2004).]

ford5
Dirt Forum Champ
Total posts: 711
posted August 11, 2004 05:25 PM  
speed06 Call Harold Schnarr in Canton Ill. he is a friend of mine and he had a car just like what you want for sale it was a Camaro stub\tube rear\leaf car\ T-bird skin
tell him Brian from Clarence sent ya.

bobaluuu
Dirt Freak

Total posts: 474
posted August 11, 2004 09:29 PM  
thats it , take a chevy and put a ford skin on it if rules allow. I spend good money after bad trying to run mopars and the chevy guys spent half less and ran right with me.
Im still a mopar nut but a chevy racer.

------------------
Light it up, Baby!

speed06
Dirt Full Roller

Total posts: 74
posted August 12, 2004 07:22 AM  
I cant run a chevy stub and ford motor and skin, all 3 have to be of the same manufacturer.... I already have a nice camero stub car.

JDF Motorsports
Dirt Freak

Total posts: 216
posted August 12, 2004 03:56 PM  
Scotty Allen at Allen Autosports builds a Super Stock chassis off of a Crown Vic stub. They have a great geometry and are very light. He is located in Mid Missouri. He also builds modifieds. His cars are very succesful around here.

    

Back to the Archives