posted August 05, 2004 07:30 PM
where can i find a conversion kit for disc brakes for the rear of my car thanks guys
racer17j Dirt Forum Champ
Total posts: 5390
posted August 05, 2004 07:43 PM
I bought my kit from speedway. Not really a kit though you have to get the pieces together. 1. Rotor hats 2. .810 rotors 3. spacers for the calipers/ pads 4. bolts for rotor to hat 5. Metric caliper brackets 6. Pads from Autozone 7. Metric calipers from Autozone 8. Master Cylinder from a 68 vette (?) with manual 4 wheel discs, not power brakes. Got it from Autozone too.
A word of warning. Be very careful / thoughtful where you place brackets. I fiddled with mine for a couple of hours before i was sure that was exactly where they need to be. I welded them on and to check my right axle flange or even change the brake pads on the RR I have to lower the spring out of the way because the caliper bolt is exactly the same height as the spring !!!!!%*@. The left side is fine so i just didn't check it close enough. No extra charge for that bit of information.