Visit The Dirt Forum for More Information

Author Topic:   hei dist ?
stic8
Dirt Full Roller

Total posts: 69
posted August 01, 2004 02:27 PM  
does anyone now about changing springs or weights inside the dist or should it be taken back to the motor man ?

racer17j
Dirt Forum Champ
Total posts: 5390
posted August 01, 2004 03:04 PM  
which springs or weights ? are they all standard parts?

I-B-RACIN
Dirt Maniac

Total posts: 132
posted August 01, 2004 04:53 PM  
weld it if got a starter that'll turn it. If not the spring dont really matter theyall advance out over 3000 rpm anyway just set total to 35 degree.

racer17j
Dirt Forum Champ
Total posts: 5390
posted August 01, 2004 05:39 PM  
to weld them find someone else or do it ourself we check timing running car at 3000rpm do you still need to do this if weights are welded?

I-B-RACIN
Dirt Maniac

Total posts: 132
posted August 01, 2004 06:23 PM  
no you dont have to set it at 3000 rpm but i run it up so the engine is running smooth (makes it easier to see the mark)

    

Back to the Archives