Visit The Dirt Forum for More Information

Author Topic:   lowering leafs
dirtracer76
Dirt Roller

Total posts: 19
posted July 15, 2004 08:51 PM  
Is there any way to lower a leaf spring vehicle without gettin' them re-arced, takin leafs out or lowering blocks?!?!?

juni
Dirt Maniac

Total posts: 184
posted July 15, 2004 11:05 PM  
I took the front spring mounts out and built boxes on top of them and drilled new holes for the front spring eye and sunk them up into the body . I tied the top of the box to the cage to make it more strong . Some tracks do not alow this . mine does not alow it now .So i have to rearch mine or dearch them . good luck.

marrs
Dirt Full Roller

Total posts: 29
posted July 15, 2004 11:13 PM  
If tou can run adjustable shacles you can raise the rear of the spring up to the frame

UNVRNO
Dirt Maniac

Total posts: 136
posted July 16, 2004 04:57 PM  
use lowering blocks.

and if you move any mounts move the front down the rear up. about 2 inches on both. that will put a stock camaros leafs almost perfectly at the correct installation angle per Landrum...


    

Back to the Archives