Visit The Dirt Forum for More Information

Author Topic:   basic front end question
Dirt Freak

Total posts: 303
posted June 19, 2004 10:39 AM  
When adjusting caster and camber on a stock mount front end, do you start first adjusting the front or rear bolt on the upper a arms?

Dirt Forum Champ
Total posts: 516
posted June 19, 2004 11:35 AM  
It does not really matter, just keep playing with the shims to get where you want. We had to gring the inside of the a arm bar on the left to get the pos camber and to take some pos caster out. Better than trying to relocate the upper mount.

Dirt Full Roller

Total posts: 72
posted June 20, 2004 01:19 PM  
i like to get the caster right first...then the camber,,but that is just me and also usually do the lf first because sometimes you are limited to what you can get..then adjust the rf to get the caster split i want


Back to the Archives