Visit The Dirt Forum for More Information

Author Topic:   Need an A-arm dimension
WesternAuto17
Dirt Forum Champ
Total posts: 569
posted June 10, 2004 08:18 AM  
I'm stuck at work and I need some info.

Anbody know the distance from the center of the cross shaft to the center of the balljoint on a stock metric a-arm?

Thanks........

UFnARacing
Dirt Maniac

Total posts: 179
posted June 10, 2004 08:38 AM  
I believe it's 8.5". Not positive, but 90% sure.

------------------
http://webpages.charter.net/ufnaracing/

WesternAuto17
Dirt Forum Champ
Total posts: 569
posted June 10, 2004 09:14 AM  
Well, the guy at the store said his were longer than stock at 8.5", may be he was just mistaken.

Anyone else? Thanks,

juni
Dirt Maniac

Total posts: 184
posted June 10, 2004 10:19 AM  
I measured one i have here at work it is 8 inch from center of shaft to center of grease zert . Thats straight out not at a angle.

WesternAuto17
Dirt Forum Champ
Total posts: 569
posted June 10, 2004 12:01 PM  
That makes sense.

Thanks guys.

    

Back to the Archives