Visit The Dirt Forum for More Information

Author Topic:   rear control arms for metric grand prix
lefthander
Dirt Full Roller

Total posts: 37
posted May 21, 2004 02:42 AM  
my rear control arms are in stock location,stock holes,how can i get more coming off the corners,can I move the lower arms to achieve this,and will it mess with ride height.Also should rf height be a little higher than other 3 corners.

Racer13T
Dirt Full Roller

Total posts: 46
posted May 21, 2004 05:46 AM  
drill new holes in top trailing arm about 1 inch from stock holes and weld some big washers so noone can tell it will give you more pinion angle

lefthander
Dirt Full Roller

Total posts: 37
posted May 21, 2004 06:15 PM  
front or rear of the arms


racer17j
Dirt Forum Champ
Total posts: 5390
posted May 21, 2004 07:16 PM  
it's on the rear you can't do anything with the front it's a bushing you will also have to cut some of the arm off so it doesn't hit on the housing

    

Back to the Archives