posted May 20, 2004 12:25 PM
Kind of along the lines of the other PS post. I have a 70's camaro with a stock GM power steering box on it. I bought an after market pump. My question is which is the pressure line on the steering box and which is the return line. There are no markings on the box. I do know it is the flare type not the o-ring type and one of the fitting on the box is a little bigger than the other. I would assume the bigger NPT fitting is the pressure and the smaller NTP is the return? Does that sound about right????
Lockon Dirt Roller
Total posts: 11
posted May 22, 2004 01:20 PM
Bump...no one knows which line on the steering box is the pressure and which is the return?
street stock 40plus Dirt Newbie
Total posts: 2
posted May 23, 2004 09:40 PM
Your high pressure line is the inner most fitting, closest to the engine.
[This message has been edited by street stock 40plus (edited May 23, 2004).]