Visit The Dirt Forum for More Information

Author Topic:   rotors and spindles G/M Vehicles
Dirt Maniac

Total posts: 127
posted May 05, 2004 09:44 PM  
I currently have 5 on 5 rotors is it possible that I can swap a rotor from another car or truck so that I can use the smaller 4 on 4 3/4 that will fit my existing spindle this will help me in 2 ways
1. I have all ready swapped rear end it has smaller pattern 2 different sizes of spares a real pain to keep seperated
2. it will help get me lower to the track

Dirt Forum Champ
Total posts: 5390
posted May 05, 2004 09:47 PM  
I can get shorter tires on the smaller pattern say 14 inch tires rims have a buddy w lotsa 14" tires for free

Dirt Freak

Total posts: 402
posted May 05, 2004 10:46 PM  
What spindles are you running? If you have the stock metric spindles with 5 on 5 rotors then someone put aftermarket rotors on it. just go with the stock rotors.

Dirt Forum Champ
Total posts: 5390
posted May 06, 2004 05:02 PM  
keep in mind your gonna have to run a different gear with the smaller tires you also have no options for offset wheels with 14 in wheels . one other thing that i ran into last weekend my car sits real low too and i had a guy bump me and got hooked on the top of my bumper and dang near took me to a meeting with mr concrete wall. on asphalt it's best to get as low as possible but dirt it's not as critical. set your ride heights with springs not tires


Back to the Archives