Visit The Dirt Forum for More Information

Author Topic:   Welded HEI
Burque
Dirt Forum Racer

Total posts: 98
posted May 05, 2004 02:38 PM  
Ok I have seen a bunch of post on this topic but all I hear is weld it. Well I guess I'm not as inclined as most I guess! Does someone have more info on the welding up part where and how on the distributor? Or does any one have a pic of it that would even be great. I know how to weld, install the distributor and all that stuff but never welded a HEI or seen one welded so any help would be great.
Thanks

gould
Dirt Forum Champ
Total posts: 730
posted May 05, 2004 06:57 PM  
if you get a hei curve kit (lighter springs and weights) that will do the same except it will start better.

------------------
www.geocities.com/gouldracing11

Busch
Dirt Full Roller

Total posts: 46
posted May 06, 2004 09:36 PM  
If you wish to do so push the weights all the way out and weld them into place Remember that your vaccum advance must be locked also. I recommend a good distributor

    

Back to the Archives