Visit The Dirt Forum for More Information

Author Topic:   FLEXI FLYER frt end package problems
neil rucker
Dirt Forum Champ
Total posts: 799
posted April 23, 2004 08:25 PM  
I purchased a BUMP STEER/ACKERMAN correction kit from FLEXI FLER for a 76 camaro street stock. It consists of diffirent idler arm, centerlink, special pitman arm, and extended lower and upper ball joints. i am having trouble fitting the upper ball joints in the stock a arms, and also the idler arm needs to be moved at its mounting location to get the centerlink level again. Its pretty safe to say its not a simple bolt on deal for dummies like me. any help? anyone? thanks, neil

rico 08
Dirt Forum Champ
Total posts: 1139
posted April 25, 2004 09:32 AM  
For the uppers you need to break out the die grinder to fit the bigger ball joint in the stock upper,you can either grind the ball joint or the arm.The holes need to be redrilled also.The lower will have to be welded in,you can get a adaptor but i don't think it will allow you to keep it in place without a tack weld tho.Good luck

neil rucker
Dirt Forum Champ
Total posts: 799
posted April 25, 2004 11:55 AM  
thanks rico. I need with the steering linkage. (IE) idler arm mounting. anyone? thanks, neil

    

Back to the Archives