Visit The Dirt Forum for More Information

Author Topic:   bent spindles?
c folmar
Dirt Newbie

Total posts: 1
posted April 19, 2004 12:14 PM  
i have a 80 buick regal street stock car. we been having problems getting the toe to stay set. we just replaced all the ball joints, tie rod ends, and the idler arm. we think both the spindles might be bent but aren't sure. i have another set of spindles off of a 80 grand prix which are also the big spindles. the one's off the grand prix don't seem to be identical to the ones we pulled off the regal. so my question is would it be alright to run my old spindes if they are bent if i still have enough ajustment in the tie rod ends.

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 19, 2004 03:45 PM  
get anew set of spindles and make youor own savers all you need is to see a set they are real easy to build

------------------
U LIFT U LOOSE

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 19, 2004 06:02 PM  
metric spindles even bend on the street i've seen a few over the years on cars we brought in that were bent so it's kinds hard to tell 20 for a spindle checking tool isn't to bad lol then make your own using that as a pattern

    

Back to the Archives