Visit The Dirt Forum for More Information

Author Topic:   help with auto zone clutch disk
marksracing
Dirt Forum Racer

Total posts: 79
posted March 27, 2004 10:06 PM  
need to know what year and model chevy had a 10.5 in clutch disk in it the gave me one for a 76 camaro and it is 11 in. need the 10.5 in please help

racing33A
Dirt Forum Racer

Total posts: 97
posted March 27, 2004 11:28 PM  
just went through the samething, 1968 chevy corvette was what I ended up with.

PEDDLER
Dirt Freak

Total posts: 446
posted March 28, 2004 06:13 AM  
Go to a real parts store.

joetaylor
Dirt Forum Champ
Total posts: 640
posted March 28, 2004 07:30 AM  
PEDDLER IS CORRECT

REAL PART STORE

------------------
U LIFT U LOOSE

cobb
Dirt Maniac

Total posts: 131
posted March 28, 2004 07:59 AM  
take your flywheel to the store with you and match one up using the flywheel

Jesterondirt
Dirt Full Roller

Total posts: 56
posted March 28, 2004 09:53 AM  
(deleted post)

[This message has been edited by Jesterondirt (edited March 28, 2004).]

6pack
Dirt Maniac

Total posts: 171
posted March 28, 2004 10:19 AM  
quote:
Originally posted by marksracing:
need to know what year and model chevy had a 10.5 in clutch disk in it the gave me one for a 76 camaro and it is 11 in. need the 10.5 in please help

Corvette or late 60's early 70's Camaro. Tell them you have the 10.4" clutch.


racerguy500
Dirt Maniac

Total posts: 168
posted March 28, 2004 07:29 PM  
I told them I had a 70 Nova with a 250 6 cylinder. But I used a REAL store too. The listing should be the same though. Good luck.

marksracing
Dirt Forum Racer

Total posts: 79
posted March 28, 2004 07:30 PM  
THANKS THE CORVETTE IS THE RIGHT ONE OF COARSE THEY HAD TO ORDER IT . THE ZONE IS THE ONLY BIG PART HOUSE IN CROSSETT , ARKANSAS THANKS AGAIN

[This message has been edited by marksracing (edited March 28, 2004).]

UNVRNO
Dirt Maniac

Total posts: 136
posted March 28, 2004 07:54 PM  
82 up camaros
81 malibu
and lots of other cars.

probably all cheaper than a clutch with the name corvette attatched to it.

superdave
Dirt Freak

Total posts: 280
posted March 28, 2004 08:38 PM  
Use www.napaautoparts.com to look your parts up. Just try some different cars you think might have them. The NAPA site will show you the size and spline etc. when you click on the part numbers.

Good luck,
Superdave

redneck racing
Dirt Forum Champ
Total posts: 860
posted April 10, 2004 07:48 PM  
You can also go to partsamerica.com and do the same thing. Eddie

akadirtracer7
Dirt Freak

Total posts: 217
posted April 11, 2004 07:32 AM  
definatly find a real parts store!!!!!!!!!!!!!

maniac motors
Dirt Maniac

Total posts: 128
posted April 12, 2004 05:20 PM  
1982 camaro 305 with a 4 speed. i work at a parts store and race and am the one helping out the local racers all week. the sachs clutch set part # is k1675-10 it is 10.5" 1-1/8" 10 spline disc and they come with clutch disc,press plate,t/o brg and a pilot brg as long as a align tool

    

Back to the Archives