Visit The Dirt Forum for More Information

Author Topic:   opinions on nerf bars
way2fast72
Dirt Freak

Total posts: 303
posted February 22, 2004 08:06 PM  
anyone have a prefrense as to mounting,to the cage? verses to the scin its self?

eaton89
Dirt Freak

Total posts: 268
posted February 23, 2004 09:40 PM  
I have some rub bars mounted threw the door skin and attached to the door bars. I've seen them with a bolt so you can remove them. I made them so they insert into a bigger tube and put a little weld on them so they can be removed if needed. Saved the side last year , only to deflect the hit into the rear and cause a broke axle.

Okie11m
Dirt Freak

Total posts: 287
posted February 23, 2004 10:00 PM  
If you mount them to the skin you will have a good chance of loosing the whole body in a minor rub. Mount it to the cage.

ARMallardSlayer
Dirt Maniac

Total posts: 175
posted July 05, 2005 11:42 AM  
Ours are mounted to the cage, with bolts so you can remove them.....I prefer to run them!

------------------
If you can't work em in close & git em in your face with their orange landing gear down, don't bother taking the safety off......

hsracer158
Dirt Full Roller

Total posts: 33
posted July 05, 2005 02:09 PM  
Run them. Get some spuds welded to the cage, and then match the bar up to that. We have to run pins thru ours or use grade 8 3/8 bolts and nut them. They seem to save alot of body work, as long as they are far enough out from the body, but yet not far enough out to catch on other cars
Rick

    

Back to the Archives