Visit The Dirt Forum for More Information

Author Topic:   camaro sprigs?
28 T
Dirt Full Roller

Total posts: 41
posted December 19, 2005 06:26 AM  
camaro front springs what height? Do you run short spring with a bucket yours?

redneck racing
Dirt Forum Champ
Total posts: 892
posted December 19, 2005 11:25 AM  
I have wt jacks in mine and I use a 9" spring, if you are not allowed jacks you can use a 12" spring(stock type) that Speedway motors sells which should work fine, i used them before i got my wt jacks. Eddie

28 T
Dirt Full Roller

Total posts: 41
posted December 19, 2005 04:46 PM  
I can run the bucket as long as its not adjustable but I have heard that bending shocks is a problem with them

Dirt Freak

Total posts: 245
posted December 19, 2005 05:56 PM  
i used to run the adjustable buckets on mine and 9" springs but the buckets were rubbing the shock so i took em out and put in the stock appearing 12" but i think if we would have cut the bucket on an angle when we were adjusting the ride height i think it would have cleared a lil better

oceanridge motorsports
Dirt Full Roller

Total posts: 53
posted December 21, 2005 09:55 PM  
We run the adj. buckets . Had elongate the shock holes , and move the shock over just a tick to get clearance . On a related note I have a pair of pro shocks with just very minor holes rubbed through the sides I'll sell cheap ! lol

Dirt Freak

Total posts: 374
posted December 21, 2005 11:30 PM  
In the past, I have used non-adjustable buckets and cut them on an angle so there was shock clearance. I never had a shock rub. AFCO stock mount shocks 900 and 1000 springs. 3200lbs Camaro

Back to the Archives