Visit The Dirt Forum for More Information

Author Topic:   Camaro Quarterpanels
hobby39
Dirt Maniac

Total posts: 116
posted October 31, 2005 08:45 PM  
Does anyone know where to get aftermarker stock appearing 1977-1981Camaro Quarterpanels. I have a 1979 and believe the body style ran from 77-81.

poorboy racing 53
Dirt Full Roller

Total posts: 34
posted October 31, 2005 09:03 PM  
They make them for our track. they look great.Johnny Fab, Santa Maria,Ca - 805 925-6009

poorboy racing 53
Dirt Full Roller

Total posts: 34
posted October 31, 2005 09:18 PM  

 
her's a pic of our car. I think it worked

redneck racing
Dirt Forum Champ
Total posts: 874
posted November 06, 2005 11:01 PM  
Try performance bodies, I think they still do the older camaro. Eddie

TRIPLE T
Dirt Roller

Total posts: 6
posted November 07, 2005 09:08 PM  
[QUOTE]Originally posted by redneck racing:
Try performance bodies, I think they still do the older camaro. Eddie[/QtOTE]
http://www.raylinebodies.com/

hobby39
Dirt Maniac

Total posts: 116
posted November 09, 2005 06:23 PM  
I looked on performance bodies web site and in one of their catalogs and didn't see and stock appearing camaro stuff I might give them a call I already talked to raylinebodies before posting this question their stuff look's good from the pictures they sent me. I was looking for something closer to NM the shipping for raylinebodies was $99 and the quarters were $130 so I'm almost paying as much for shipping as for the panels. I've been working 12 hour shifts so I haven't had a chance to call anyone else. I go to austin TX and Phoenix AZ all the time so if anyone know's of a place between austin and phoenix let me know. and actually work is sending me to Las Vegas so anything that way is also an option.

avila
Dirt Freak

Total posts: 220
posted November 11, 2005 09:24 AM  
www.sardesonracing.com

Spud MacKenzie
Dirt Newbie

Total posts: 2
posted November 12, 2005 11:52 PM  
this is the only camaro bodies i could find on their website dont know if its what you are looking for though
http://www.performancebodies.com/short_track_bodies_81_camaro.asp

fxdwg90
Dirt Roller

Total posts: 6
posted November 22, 2005 06:20 PM  
Rayline makes a complete set of replacement panels for F bodies. I just got mone and they look great... http://www.raylinebodies.com/

hobby39
Dirt Maniac

Total posts: 116
posted November 23, 2005 05:24 AM  
One of the questions I had about their quarters doors and fenders is their all 3 inches longer then stock so you can slide one behind the other then pop rivit them together does this leave a smooth surface or is there a big ridge where the 2 pieces come together. with real doors and fenders we **** them together with a piece of metal behind them then pop rivit the doors and fenders to the metal leaving a smooth finish. also do the fenders have bolt holes to bolt up like a real fender.

john56h
Dirt Roller

Total posts: 7
posted December 04, 2005 03:30 PM  
For stamped steel stock contour panels try some of the aftermarket bodyshop suppliers. They probably have rust repair panels that do not go all the way up to the window but would be okay if you don't mind splicing them in. Try Sherman and Gateway also JC Whitney.

Back to the Archives