Visit The Dirt Forum for More Information

Author Topic:   Upper control arms
sideways
Dirt Forum Champ
Total posts: 715
posted June 29, 2005 09:43 AM  
Are upper control arms on the rear axle for a 75 chevelle 112wb and a 108 metric car the same length?I know the holes would need to be drilled out on biggy. thanks

iowatoolman
Dirt Freak

Total posts: 369
posted June 29, 2005 12:59 PM  
i don't belive so

o5racer
Dirt Freak

Total posts: 402
posted June 29, 2005 05:16 PM  
Yes they are the same length. The old chevelle arms are drilled for 1/2 inch bolts and the metric ones are drilled for 12mm bolts. If you get replacement bushings they are drilled for 1/2 inch bolts. The impalla uppers are different though. I cant remember exactly what but its something withthe front bushing.
Nick

sideways
Dirt Forum Champ
Total posts: 715
posted June 29, 2005 07:34 PM  
Cool deal.Thanks the car my freind bought is a 112 and the uppers were cut(and were not allowed to),and we werent sure how much?And I had a set of metric uppers that looked close but we didnt know how long. thanks

Back to the Archives