Visit The Dirt Forum for More Information

Author Topic:   heads
FOX
Dirt Full Roller

Total posts: 28
posted May 24, 2005 05:57 AM  
i was wondering if anyone could tell me how much power i will pickup by changing my stock #882 heads to anglemealed #993 heads?
TY!

97dirt
Dirt Forum Racer

Total posts: 94
posted May 24, 2005 06:49 AM  
You proabably won't notice much of a difference,unless the 993's are cut way more than the 882's

Eljojo
Dirt Forum Champ
Total posts: 968
posted May 24, 2005 04:35 PM  
993's ar good heads.not the best, but good.
882's are plentiful heads, not real good, but real plentiful

FOX
Dirt Full Roller

Total posts: 28
posted May 31, 2005 08:07 AM  
how much more compression will i get if i angelmill the 882 heads,an is it worth doing.TY

97dirt
Dirt Forum Racer

Total posts: 94
posted May 31, 2005 08:38 AM  
How many cc's are your 882's,theres other ways to gain compression, you could use thin head gasket,deck block,different pistons, just doing one of these won't make a huge difference,but doing all of these will,I think you can use the toolbox to figure out compression

Back to the Archives