Visit The Dirt Forum for More Information

Author Topic:   Cam
FOX
Dirt Full Roller

Total posts: 28
posted May 05, 2005 05:58 AM  
I was just wondering what everyone thought abought the 300 hp cam GM made,Im running the after market version of it that Melling made.Would appreciate all input TY

97dirt
Dirt Forum Racer

Total posts: 94
posted May 05, 2005 10:25 AM  
Its not real impressive with open chamber heads, been there done that

ruggs66
Dirt Maniac

Total posts: 193
posted May 05, 2005 10:13 PM  
That thing is Really small in duration....not much power over 4000 rpm

what are your cam rules?

FOX
Dirt Full Roller

Total posts: 28
posted May 06, 2005 05:55 AM  
There are no rules on the cam,just a claimer on the motor!I run a 4/10 mile High banked dirt track,Turbo 350 Trans,an 241 rear end!

ruggs66
Dirt Maniac

Total posts: 193
posted May 06, 2005 09:23 AM  
No cam rule?

well then I would call around to find a solid roller cam that would fit your RPM needs.

what size engine do you run?



racer17j
Dirt Forum Champ
Total posts: 5390
posted May 06, 2005 01:36 PM  
i'll agree with 66 that cam is pretty much useless in a classwith no limit look in the racing catalogs and you can get cams and lifter pretty cheap that will blow that one out of the water

Back to the Archives