Visit The Dirt Forum for More Information

Author Topic:   Camaro/Nova rearend interchange?
SOONERFAN
Dirt Roller

Total posts: 7
posted April 22, 2005 10:47 AM  
What will interchange with a 1976 nova as far as width goes? Was wondering if a S-10 is the same width or close. I am wanting to find a rearend with gears already setup to put in my nova. I can weld new spring perches and set pinion angle, but I don't want to mess up gears by trying to set them up myself! Any help is greatly appreciated!

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 22, 2005 06:42 PM  
no on the 9"......I need a 3.42 gear, but I don't know if a carrier with a 2.73 original gear will work. Any ideas?
I already have the gears, just don't know what carrier I need to have!

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 26, 2005 06:59 PM  
what size is the gear ? you can get spacers for the series 2 carriers 2.73 and lower to run the series 3 gears on 3.08 and higher. i might be able to get you a carrier from a nova but it will have welded spiders if thats alright. not sure if he s****ped it or not rolled the car and bent the housing so went to a 12 bolt in the next car

Back to the Archives