Visit The Dirt Forum for More Information

Author Topic:   a little help needed
racer s
Dirt Forum Racer

Total posts: 83
posted February 26, 2005 09:30 PM  
what would 3 4 speed saginaws that need rebuilt be worth and how can you tell that they are any good in the first place they are all together but what should I look at

turnleft44
Dirt Full Roller

Total posts: 45
posted February 27, 2005 06:22 AM  
Racer i dont know what there worth now a days because i havent used one in so long. Do some shopping around for used prices on these trannys and compare. They held up real well and could take some abuse. I think there only down fall is that there heavy. JMO

redneck racing
Dirt Forum Champ
Total posts: 860
posted February 27, 2005 07:49 PM  
Racer out here in Utah I have paid $125.00 for a used 3 speed and glide. Eddie

02 Blewbyu
Dirt Full Roller

Total posts: 48
posted March 14, 2005 10:21 PM  
I paid 20 bucks for a 4 speed saginaw at pick and peel when they were running a managers special.

------------------
Stomp and steer racing

dirthotrodder
Dirt Newbie

Total posts: 4
posted March 15, 2005 12:21 AM  
The power glideglide used two differnt splinded output shafts. I belive one is for1.76 ratio and one for the 1.82 ratio. Yes the one with the thick splines very hard to find. Someone posted this number a while back.M&R racing 920-528-7090 said they had the yolks. But I haven't tried them. Hope this helps

racer17j
Dirt Forum Champ
Total posts: 5390
posted March 15, 2005 11:03 AM  
i made a post about needing a thick splined yoke do they do overnite shipping?

Back to the Archives