Visit The Dirt Forum for More Information

Author Topic:   Alternator ?'s
MetricMonte
Dirt Maniac

Total posts: 111
posted January 30, 2005 02:45 PM  
I bought a 1 wire alternator from Autozone to run on my Pure Street. It has the very small pulley on it so I already bought a 5 inch pulley from speedway. The thing is, are they regular threads or backwards threads and how do you foul it to get the nut off and on again...cant really hold by the alternator fan without bending or breaking the blades. Also is the pulley pressed on or just held on by that big nut? Any help here would be great...THANKS

BCracing
Dirt Full Roller

Total posts: 32
posted January 30, 2005 03:51 PM  
should be right handed threads and its just held on there by the big nut--I would use a impact to get it off--alot easier

o5racer
Dirt Freak

Total posts: 402
posted January 30, 2005 04:09 PM  
As a mechanic I can tell you that the best way is a heavy leather glove to hold the fan and pulley and an impact fot the nut. Not reccomended without the glove.
Nick

joetaylor
Dirt Forum Champ
Total posts: 640
posted January 30, 2005 04:49 PM  
05 is correct but I do not hold the pulley as for i can hurt you I just hit it with an impact and yes It is right hand threads and the pulley just slides off hope this helps

Bulwinkl
Dirt Full Roller

Total posts: 37
posted January 30, 2005 08:26 PM  
if just a impact doesn't do it try a filter strap wrench !!

Back to the Archives