Visit The Dirt Forum for More Information

Author Topic:   cam question
Shortfuse15
Dirt Full Roller

Total posts: 37
posted January 25, 2005 04:03 PM  
i have a 350 chevy that is built stock. its for a pure stock class and im running a 72 monte carlo. the rules say no performance parts. what would the best cam be for this engine. I dont want to go too big but yet since there is no rule for the cam, i want to do this right. thanks

Champ2x36
Dirt Full Roller

Total posts: 29
posted January 26, 2005 03:15 AM  
We had good luck with a cam from Speedway Motors. Part #915110591, it's a hydraulic cam, sells for $69.95. You can check out the specs at www.speedwaymotors.com.

Ed

When the drops the bullsh** stops!!


Stevei2i0
Dirt Full Roller

Total posts: 54
posted January 26, 2005 06:54 AM  
Im runnin a "stock" 350 in Pure Stock also. Im gonna try the new Cam/Lifter set by "Rhoads" this year. We have to pull 18" vacume at the intake.Had a lift rule of 450 last year.

ruggs66
Dirt Maniac

Total posts: 193
posted January 26, 2005 01:51 PM  
Rhoads makes cams??

Stevei2i0
Dirt Full Roller

Total posts: 54
posted January 30, 2005 10:06 PM  
yes they have cams an lifters we use the hydro-solid kits they run $240 go to


Stevei2i0
Dirt Full Roller

Total posts: 54
posted January 31, 2005 06:42 PM  
WWW.RHOADSLIFTERS.COM

Back to the Archives