Visit The Dirt Forum for More Information

Author Topic:   Small Lift Cam Rule--HELP PLEASE
Dirt Roller

Total posts: 7
posted January 25, 2005 03:32 PM  
Our rules read: Must run OEM camshafts with stock lift of .278 @ lobe. No aftermarket cams allowed, stock rockers only!

My question is where is the best place to get a cam ground where it will still run good but will pass tech w/dial indicator?
Any suggestions will be greatly appreciated!

Dirt Full Roller

Total posts: 29
posted January 26, 2005 03:18 AM  
Howards Cams have a number of "stock lift" cams that have considerably more duration than the stock cams.


When the drops the bullsh** stops!!

Special Ed
Dirt Full Roller

Total posts: 63
posted January 26, 2005 05:02 AM  
If you are needing a Ford cam try

Dirt Roller

Total posts: 7
posted January 26, 2005 06:18 AM  
Thanks guys, I guess I should've added more info. The engine is a chev 350 and the track is a long 3/8 mile high banked. What lobe seperation and duration will make it run better? Has anyone ever had to run anything like this before and if so will you share your info? THANKS

Back to the Archives