Visit The Dirt Forum for More Information

Author Topic:   looking for vacuum cams
Dirt Roller

Total posts: 14
posted December 13, 2004 12:07 PM  
Does anyone know where to get a cam that pulls 16 in vac at 2000 rpm for induro rules. Also any other engine building advise for an endure (lifters-pistons-heads-etc) thanks for the help

Dirt Freak

Total posts: 369
posted December 14, 2004 06:39 PM  
pulling 16 @ 2000rpm is very easy

we have to pull 15 @ 1000rpm for figure 8's

drive hard or drive home

Dirt Roller

Total posts: 7
posted December 15, 2004 11:15 AM  
lucky yall we gotta pull 18" @1000 rpm u can run a set of RHOADES HYDRO-SOLID lifters an youll be amased at how big of cam u can run an still pull your vacume or ask some of the sponcers here for tech help they can hook u up with a good cam

Dirt Freak

Total posts: 302
posted December 15, 2004 06:56 PM  
try comp cam 12-242-2 or comp 12-268-4

Dirt Forum Champ
Total posts: 516
posted December 16, 2004 05:51 AM  
I ran the 12-242-2 in my purestock motor and I was competitive in streetstock. Im not sure why but that motor ran like a scared ape!

sc1 racing
Dirt Freak

Total posts: 419
posted December 24, 2004 03:27 PM  
bullet cams has an awesome solid lift cam, it pulls 19lbs vaccum, and great low to high rpm cam. the cam and lifter kit runs around 150.00

Dirt Full Roller

Total posts: 29
posted January 09, 2005 01:15 PM  
Howard's Cams have several vacuum rule cams or call 'em at 920-233-5228


When the greenflag drops the bullsh** stops!!

Dirt Full Roller

Total posts: 33
posted January 17, 2005 07:06 PM  
I ordered a cam from howards had to send it back twice because it was ground wrong then they told me if I sent them the cam BACK the would send me the (THE RIGHT CAM I SHOULD OF GOT FIRST FOR HALF PRICE!!!!) I would have one and a half times the price of the original! I wouldn't recommend a load of dirt from them. But thats just what happened to me dont want to offend anyone

Back to the Archives