Visit The Dirt Forum for More Information

Author Topic:   400 with 327 crank
willi23
Dirt Roller

Total posts: 7
posted October 16, 2004 04:51 PM  
has anybody run this combo on short tracks and how does it compair to 355 with 9to 1 compression . we run with two barrell manifold and gm two barrell carb.

joetaylor
Dirt Forum Champ
Total posts: 640
posted October 17, 2004 06:29 PM  
look under the posts )377(

------------------
if every thing is under control your not fast enough

19J
Dirt Freak

Total posts: 370
posted October 18, 2004 04:19 PM  
Thats not a 377. Its what nascar runs. They run it with a 6.2 rod. It comes out to around 350. There has been discussions about that. Some tracks dont allow "strokers" so might wanna check that out too. How it compares with good parts nascar puts out good hp dont they?

amonett3rdgen
Dirt Full Roller

Total posts: 31
posted October 23, 2004 08:20 AM  
running that combo w/two barrel. make sure you have good heads. it needs to breath

jammin
Dirt Administrator

Total posts: 6243
posted October 23, 2004 02:34 PM  
i was talking to midwestmotorsports about building one. if you have a good block and good heads, i think it may be the way to go.
i was talking to midwestmotorsports on here.
also speedomotoive has a more claimer style one of these, je pistons, 6.250 rods, and i think cast crank. 1160.
but good heads i think would be the key to this motor. if i dont build one this year i will build one some time in the future.

Back to the Archives