Visit The Dirt Forum for More Information

Author Topic:   clevor
stewaj01
Dirt Roller

Total posts: 13
posted September 07, 2004 07:10 PM  
I was wondering if their are any factory ford intakes that can be modified to work on a 351 clevor.

outlawstock17
Dirt Forum Champ
Total posts: 1363
posted September 07, 2004 07:46 PM  
no.

pmiracing
Dirt Full Roller

Total posts: 44
posted September 09, 2004 05:23 PM  
NOPE, I THINK WE ALL WISH THEY WOULD HAVE MADE ONE!

outlawstock17
Dirt Forum Champ
Total posts: 1363
posted September 09, 2004 06:29 PM  
actually a clevor is a dinosaur. there are much better, modern designed cylinder heads available for a windsor that will out perform any factory iron cleveland head including the aussie head. times have certainly changed and i attribute this to the rise of the mustang GT. america's favorite pony car...

stewaj01
Dirt Roller

Total posts: 13
posted September 14, 2004 08:43 AM  
outlawstock17,

What are some other good stock ford heads that I can use. We are only allowed minimal head work so they are going to need to flow pretty well in stock form.

akadirtracer7
Dirt Freak

Total posts: 217
posted September 14, 2004 05:33 PM  
I think the gt 40 P are about the best production heads came on v-8 explorers.

outlawstock17
Dirt Forum Champ
Total posts: 1363
posted September 14, 2004 07:07 PM  
gt-40 off late model lightning trucks, gt-40p off 5.0 explorers as dirtracer mentioned. '69-70 351w or '65-'66 289 for more compression.

if you can run any cast iron head....svo n351 or n352, pro-action or dart roush 200.

Special Ed
Dirt Full Roller

Total posts: 63
posted September 14, 2004 07:53 PM  
The GT-P head is a pretty good head and readily available. The main problem you will have with them is finding headers and/or manifolds to fit them properly due to spark plug angle.

Back to the Archives