posted August 12, 2004 07:17 PM
I have trouble adjusting my belts. I have to adjust them and then buckle them, which gets kind of annoying because it takes a couple of tries to get them just right, and then its a pain to get the lap belts latched. One problem is I'm kind of skinny and the adjusters end up between my hips and the seat. I started out running RJS belts, just ordered a set of Simpson pullups, hopefully that will help. Anybody else have similar problems.
joetaylor Dirt Forum Champ
Total posts: 640
posted August 12, 2004 08:34 PM
I have simullar problems what I did was move the mounting point further back behind the seat good luk
------------------ loose is fast & on the edge of out of control
racerguy500 Dirt Maniac
Total posts: 168
posted August 12, 2004 10:07 PM
Same here, I mount the belts far enough back that the buckle assembly is behind or outside of the seat. Just make sure you don't end up with them pulling straight back. To keep the angle the manufacturers specify you usually have to lower the mounts also.