Visit The Dirt Forum for More Information

Author Topic:   cast intake for dart heads?
keith24k
Dirt Roller

Total posts: 21
posted July 25, 2004 06:11 PM  
was thinking about changing tracks and was wondering what is the best intake to run with dart heads.were using a aluminum intake now but will have to change to be able to run any of the other local tracks

Gene
Dirt Freak

Total posts: 396
posted July 27, 2004 01:54 PM  
Be sure the intake gaskets seal. The head ports will stick out 1/8" past the intake ports. Sorry,I dont recall what gaskets I had to use.

iowatoolman
Dirt Freak

Total posts: 369
posted July 27, 2004 10:03 PM  
?? sbc felpro 1205 is the gasket and the best cast iron is the cast iron bowtie goto www.sdpc.com and look at intakes you can get a new onw for about 175
used one last year makes really awesome power or if you need 2bbl goto www.castheads for a brzezinski for about $850

iowatoolman
Dirt Freak

Total posts: 369
posted July 27, 2004 10:05 PM  
oops www.sdpc2000.com sorry about the wrong addy

Back to the Archives