Visit The Dirt Forum for More Information

Author Topic:   Caster and Camber?
Racefan20k
Dirt Roller

Total posts: 18
posted May 13, 2004 05:56 PM  
I am running a 1982 monte Carlo pure stock on a 3/8 dirt track, The caster and camber is set at the left side has no spacers in it and the right has three on each bolt does this sound right, If anyone has any ideas please let me know

PEDDLER
Dirt Freak

Total posts: 446
posted May 13, 2004 08:01 PM  
Try an old school way...
lf ... stand a carpenters square up beside the tire. Equal distance top and bottom, top ball jointb slightly foward.

rf....Stand the square up beside the tire, 1in between the top and tire, flush on bottom...upper balljoint behind the lower..

Or get a caster camber gauge

lf..+1 camber,,,+2 caster
RF...-3 camber,,,+4 caster.

Back to the Archives