Visit The Dirt Forum for More Information

Author Topic:   cam
driveing43
Dirt Roller

Total posts: 14
posted May 03, 2004 09:43 PM  
hi everyone thinkyou for all the help you have gavening me in the pass.

i have a friend that is building a pure stock
car but i think he went to much on cam he need to pull a 18 inch vac.
but this is what he has for cam lunati 00012
515 515 valv lft
343 343 lobe lft
300 300 adv dur
246 246 .50 dur
104 112 lobe cen
it is also a chevy 350 bore 30 over
with 202 valv
cam adv at 4+
z28 valv spring
with stock alum intake
qjet carb
i cant rember evrything right now but thinkyou
for everthing

p s driver 43

Drogo99
Dirt Maniac

Total posts: 120
posted May 04, 2004 02:12 PM  
No way it will pull 18" with that cam.

Try Comp Cams - "xtreme series"(I think) they have one that has a 114 degree lobe separation and my engine builder said it would pull 17".

juliaferrell
Dirt Freak

Total posts: 370
posted May 04, 2004 06:25 PM  
I believe the 00012 is going to pull around 14 or 15 at best. Lunati can give you an idea. The extreme series competition cams are the best for the vaccuum rule in my opinion.

driveing43
Dirt Roller

Total posts: 14
posted May 04, 2004 06:43 PM  
ty both for your help once again
ps driver43
harold

[This message has been edited by driveing43 (edited May 04, 2004).]

Back to the Archives