Visit The Dirt Forum for More Information

Author Topic:   Carb Question
C2W
Dirt Full Roller

Total posts: 70
posted April 22, 2004 09:04 AM  
Hey guys, I need some serious help on this. We recently had our carb rebuilt by a shop near our house. It is a Rochester 2 barrel. He did all the tricks and stuff to it. Before it was rebuilt it had a slight hesitation when you jammed on the gas hard, but when you were smooth with it, it was fine. Now that it has been rebuilt it has a terrible hesitation. Also when you put it in gear it goes dead. I am not a carb guy, so I dont know too much about them. We tried setting it last weekend, but nothing seemed to work. What could you guys suggest?? We recently moved and are 75 miles from the guy that built the carb, so it would be a long pull and alot of gas to take it back to him to set. I welcome all suggestions. I was really wanting to race this weekend, hope we can get it straight by then. Thanks.

joetaylor
Dirt Forum Champ
Total posts: 640
posted April 22, 2004 09:27 AM  
you need to ge ahold of KPlugnut he is the man that can help you and answere any questions that you have

------------------
U LIFT U LOOSE

Back to the Archives