Visit The Dirt Forum for More Information

Author Topic:   brakeing up
driveing43
Dirt Roller

Total posts: 14
posted April 18, 2004 03:25 PM  
i got a friend that has a stock 350 chev
he just getting into raceing but we ran the
car last night it run really good untill u get up around 4500rpm then it brakeing up we got a new carb and intake and steel doing it
the timeing is set on 34 and we cant it over 4500 now when we are at home it will hit over but on the track it only 4500rmp
ty for any help you can give me

joetaylor
Dirt Forum Champ
Total posts: 640
posted April 18, 2004 03:48 PM  
you will need a performance ign modual and that shuld tale care of your problem

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 18, 2004 06:45 PM  
hey ty both for the help

25JHenry
Dirt Full Roller

Total posts: 73
posted April 19, 2004 01:06 PM  
I'd put a new pick-up coil in it too. It's under the rotor button and weights. You'll have to pull the shaft out of the distributor to replace it. We run stock everything, but its new and turn 6000 RPM no problem. I know a performance ignition module would help also.

KPLugnut
Dirt Forum Champ
Total posts: 1019
posted April 19, 2004 02:04 PM  
all good answers.....then there's also the issue that stock valve springs aren't going to handle high rpms. It could very well be both a combination of the ignition system limits and valvetrain float.

Fix it before you drop valves.

KP

driveing43
Dirt Roller

Total posts: 14
posted April 19, 2004 03:22 PM  
i got everthing comeing for it now that you all told me about ty for the help
harold

[This message has been edited by driveing43 (edited April 19, 2004).]

Back to the Archives