Visit The Dirt Forum for More Information

Author Topic:   Brake Bias Question/ Problem
Dirt Full Roller

Total posts: 54
posted March 12, 2004 06:09 AM  
Heres the situation. Ive got all new braking system from the pedal to the pads and im not able to get enough rear brake. I have to crank it all the way to the rear except for 2 turns to get the psi even. I have a 7/8" on the front and 1" on the rear for the M/C bores. Do i need to switch M/C, but same size on or is it something else? Has anyone run into this situation before? Any input would be helpful. Thanks

Dirt Forum Champ
Total posts: 1363
posted March 12, 2004 07:19 AM  
switch the master cylinders. after you do that, you may need a proportioning valve in the line going to the rear brakes to get some of the rear bias out of it. i've never been able to get mine adjustable enough without it.

Dirt Freak

Total posts: 396
posted March 14, 2004 04:15 PM  
I agree with outlawstock 17

Back to the Archives