Visit The Dirt Forum for More Information

Author Topic:   seat rail mounting
casper31642
Dirt Full Roller

Total posts: 31
posted December 27, 2003 08:51 AM  
any photos of seat rails -how to mount?

racer17j
Dirt Forum Champ
Total posts: 5390
posted December 27, 2003 03:42 PM  
needs to be installed on cage .but the parts i have look like one leg needs to mounted on the tunnel?

racer17j
Dirt Forum Champ
Total posts: 5390
posted December 27, 2003 10:18 PM  
Mine mounts to the nascar bar....

wrenchturner10
Dirt Forum Racer

Total posts: 80
posted December 30, 2003 02:40 PM  
If your mounts are the two bars that mount off the cage and the seat mounts are welded to the two bars welded to the cage, then the inside just hangs in space, you may have to trim the bottom bar to clear the tunnel to get the seat low. there are also two short bars that weld from yhe top seat mount to the cross bar behind the driver on the cage. It looks a little weird for a seat mount but it is stronger than you think it would be. Ours is that type of a mount and when we took a broadside hit and the cage bent, the seat and the driver moved with the cage,away from the impact.

odb93
Dirt Forum Champ
Total posts: 537
posted December 31, 2003 01:54 PM  
The point is if you are in a wreck, that the driver goes with the cage, not the car.....

Back to the Archives