posted November 27, 2003 02:54 PM
i have seen 10 bolt chev axles with .050" or more end play. what is correct? i have seen c clips at the parts store in the "HELP" (motormite) line, that are various thicknesses, are these for adjusting end play? how much is to much and how much is not enough? help! thanks. neil
racer17j Dirt Forum Champ
Total posts: 5390
posted November 27, 2003 04:34 PM
the axles will get gulled from the cross pin. when you reinstall the axles just turn the axle a quarter turn. Than recheck your end play. new clips are a good idea also.