Visit The Dirt Forum for More Information

Author Topic:   ALIGNMENT
JRB13
Dirt Forum Racer

Total posts: 80
posted November 10, 2003 10:30 PM  
I AM BUILDING A 80 MONTE CARLO TO RUN ON DIRT DOES ANY ONE HAVE ANY SUGGESTIONS ON WHAT CAMBER CASTER AND TOE SETTINGS TO RUN.ALL FT. SUSP. PARTS MUST BE STOCK.NO AFTERMARKET UP. CONTROL ARMS ETC. I AM RUNNING 1200 RF AND 1100 ON LF IF THIS MATTERS.

dan ferry
Dirt Maniac

Total posts: 183
posted November 11, 2003 06:35 PM  
i run 1 to 1.5 degree+ camber in most i can get without changing much and 3- in rf. try to keep caster hingher on right front than left front i think atleast 2 degree split example lf 4 degrees and rf 6 degees both positive. i think these settings would need to very to application example. body roll and banking and speed of track i run on a 1/2 mile slightly banked track. as far as toe i run 1/8"+. if anyone has a different opinoin on this please post. im rookie.

JRB13
Dirt Forum Racer

Total posts: 80
posted November 11, 2003 06:53 PM  
thanks dan that info.will help alot.

Back to the Archives