Visit The Dirt Forum for More Information

Author Topic:   spindel ?
RACEINMUD
Dirt Freak

Total posts: 323
posted August 07, 2003 02:16 PM  
Hi, will the front end stuff: spindles, upper A arm, etc. off a 78 Camero fit a 79 Cutlass. Thanks, Mud

powerglides
Dirt Freak

Total posts: 374
posted August 08, 2003 06:24 AM  
They do not interchange. Camaro has big car mid 70's front end. Cutlass has metric mid size front end.

RACEINMUD
Dirt Freak

Total posts: 323
posted August 08, 2003 10:40 AM  
Thanks!

maniac motors
Dirt Maniac

Total posts: 128
posted September 01, 2003 04:29 PM  
they will fit but takes some work finding tie rod ens and brake hoses seen it done.also can use fullsize gm small bolt pattern rotor spindles too.either way the spindles are about 1 inch taller and you should understand what the affect will be compared to what you have now.

boas51
Dirt Maniac

Total posts: 190
posted September 04, 2003 08:50 AM  
the camaro spindles take the same ball joints and tie rod ends, and will bolt directly on, but as mentioned are about 1" taller. the upper control arms have a wider bolt spacing on the cross shaft.

Back to the Archives